I’m talking specifically about obeying the speed limit, doing a full stop at stop signs, etc. After receiving a speeding ticket for doing 53 in a 50, As an experiment I went a full day obeying all traffic laws 100% and it caused so much road rage. For example, there is a 2 lane road near me with a speed limit of 50 (where I got the ticket), traffic usually moves at about 60/65. There was a huge line of cars behind me and nowhere to pull over. As soon as an opening came up on the shoulder I was about to pull over and one of the cars behind me blew past me on the on the right blaring their horn. Then another truck passed me at the next opportunity and brake checked me. Both of these cars proceeded to run a red light about 1/4 mile ahead of me endangering others. By far the worst part of driving on this 2 lane road was the 25 mph work zone which is completely ignored by everyone else. It effectively resulted in me doing 25 mph in a “60” which is very dangerous.

Having needed to spend the entire day pulling over at every opportunity to let people pass I inevitably picked up a drill bit and got a flat tire.

Even matters as simple as stopping completely at a stop sign for 1 second cause immediate anger and dangerous behavior from other drivers.

What on earth are we expected to do? All I want is to avoid speeding tickets and drive safely.

  • jetA
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    1 year ago

    I think you would really enjoy reading about the strategies used in traffic engineering. Where they not only take into account the physics of driving, but the human psychology of drivers.

    The highway manual indicates for new roads a traffic survey should be done and the 80% speed should be the traffic limit for the road (this doesn’t always happen). From a TE perspective you want the law to encourage everyone to work at the same flow.

    For roads where drivers go to fast for the conditions, you can create visually hostile environments where drivers naturally slow down (not just speed limit signs, which most people ignore). I.E. add trees, break up sight lines, add curves and chicanes, making lanes more narrow, speed humps, REMOVE traffic markings (this forces people to pay more attention to figure out whats going on).

    • minorcoma@lemmy.world
      link
      fedilink
      arrow-up
      3
      arrow-down
      1
      ·
      1 year ago

      The highway manual manual is based off gut feelings and little else. Why 80%, where did that come from? How is the currently set speed limit impacting the survey? If you go to a speed trap town by the highway, you’d say the speed limit is dead on, as no one speeds since they know its a trap.

      Roads should be designed for the speed you want, and not the other way around. Your last paragraph is dead on. Real solutions look like this: https://m.youtube.com/watch?v=bglWCuCMSWc

      • Ocelot@lemmies.worldOP
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        1 year ago

        The speed limits were set at 80% many years ago when driving a car at that speed felt a lot faster. Physics and impact forces haven’t changed since then though.