Just like in the title my PC has an issue when it won’t turn on. Power button does nothing, fans do not spin, PC is completely dead. First time it happened was when I put it to sleep, sometimes it wouldn’t wake up so I just avoided putting it to sleep as a temporary solution that become quite permanent… Simple power off worked well enough but recently it won’t start even when I turn it off. If that happens I need to flip the power button on the PSU for a 30 or so seconds then it turn it back on and I can start PC no problems.
From what I read on the Internet people suggest faulty PSU. Is there a way to confirm that? I don’t want to buy a new PSU if the old one is still good. It has little over 5 years so it’s not exactly new but certainly not too old.
I also had one crash that looked like PSU fault since PC just shut down suddenly but I blamed it on some power drop in the grid at the time.
Had a similar issue once and it turned out to be a powered USB hub backfeeding and putting the motherboard into an odd power state, only figured it out when I noticed a status LED remaining on after I physically unplugged the main power for the computer. May be worth unplugging any hubs you may have to rule that out
I had this happen yesterday!
Rodecaster pro II has USB ports that function as both a client and a master, and was back feeding enough power into a gigabyte motherboard to keep the ram LEDs on, the Ethernet WOL status light, and prevent the system from powering on.
I ordered a bunch of USB power blockers (porta pow) and we will see if it fixes the issue.
Honestly that’s wild. In one laptop I have there is a dedicated barrel charging port but there’s also USB-C so I thought maybe I can charge it via USB too but nope, no power is being transferred, literally 0 amps. Meanwhile on PC if you buy an active USB hub it will power your computer lol. I feel like USB on PC should only output power. It wouldn’t be even expensive to make it that way.
Just out of curiosity is your motherboard higher or lower end?
Mid tier B550m.
I don’t have any hubs. The only thing I bought recently was 4x SATA to PCI card. But it worked ok for quite a while so this shouldn’t be the culprit?