I just moved into a student dorm for a semester abroad, and beforehand I emailed them asking whether they had ethernet ports to plug my router into (I use it to connect all my devices, and for WiVRn VR streaming). They confirmed that I could, but now that I’m here the wifi login portal is asking me to accept these terms from the ISP, which forbid plugging in a router. There’s another clause that forbids “Disruptive Devices” entirely, defined as:

“Disruptive Device” means any device that prevents or interferes with our provision of the 4Wireless to other customers (such as a wireless access point such as wireless routers) or any other device used by you in breach of the Acceptable Use Policy;

So what are my options? I don’t think I can use this service without accepting the terms, but also I was told by the student dorm support that I could bring a router, which contradicts this.

EDIT: some additional context:

  • dorm provider is a company separate from my uni (they have an agreement but that’s it)
  • ISP (ask4) is totally separate from dorm provider, and have installed a mesh network that requires an account. On account creation, there are many upsells including one for connecting more than one device. The “free” plan only allows me to sign in on a single device, and I can upgrade to two devices for 15 pounds.
  • ethernet requires login too
  • VR streaming requires a high performance wifi 6 network, which is why I bought this router (Archer C6 from tp-link)
  • SzethFriendOfNimi@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    3 months ago

    But this is a dorm. A shared environment with close proximity.

    If everyone had their own Wi-Fi transmitting at normal power there would be too much interference that even channel hopping wouldn’t fix it.

    Not to say that there can’t be some middle ground but the Wild West attitude isn’t kosher either.

    • cm0002@lemmy.world
      link
      fedilink
      English
      arrow-up
      8
      arrow-down
      1
      ·
      3 months ago

      OP already mentioned that the student WiFi is being run entirely by a third party ISP and they have more expensive paid plans for more than one device.

      Guaranteed this isn’t about running an optimal network (Though I’m sure if pressed about it they’ll start spouting excuses similar to yours) and all about company greed and constant profit growth.

      • SzethFriendOfNimi@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        3 months ago

        Probably. But I didn’t want them dealing with being cut off. They can do what they want but since it’s a dorm you can be sure they’ve had these conversations before

    • mat@linux.communityOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      3 months ago

      Yeah I definitely don’t want to hurt the network for other folks staying at this (very large) dorm complex/building. Can I reasonably run it at low power (since I only need it in my room) and not have it bother anyone?

      • cm0002@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        3 months ago

        Can I reasonably run it at low power (since I only need it in my room) and not have it bother anyone?

        Yes, this is one of those things that as long as you do it properly and don’t interfere with anything nothing will happen

        Reduce power to minimal levels, choose a band far away from the WiFi in your area (There are a number of WiFi scanning apps on the app stores) and ensure you plug in the Ethernet from the wall into the WAN port on the router so your router can handle DHCP without interfering with University DHCP networking (though it might make getting through the captive portal tricky)

      • jetA
        link
        fedilink
        English
        arrow-up
        3
        ·
        edit-2
        3 months ago

        Do a frequency scan, choose a 5ghz band, narrowest band you can, that isn’t being used, (don’t use 2.4ghz, 5ghz attenuates the fastest). If your router supports DFS, use a DFS channel

      • SzethFriendOfNimi@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        3 months ago

        Depends on whether you can adjust the Tx level but then you run into FCC level stuff that most people avoid (since boosting it is a huge issue with interference)

    • jetA
      link
      fedilink
      English
      arrow-up
      5
      ·
      3 months ago

      ok… so our friendly OP can use their router without turning on the radios and everyone is happy? let’s advise that then