the16bitgamer@programming.dev to FreeCAD@lemmy.ml · edit-22 months agoMade a functional screw and nut in FreeCADlemmy.mlimagemessage-square2linkfedilinkarrow-up112arrow-down10file-text
arrow-up112arrow-down1imageMade a functional screw and nut in FreeCADlemmy.mlthe16bitgamer@programming.dev to FreeCAD@lemmy.ml · edit-22 months agomessage-square2linkfedilinkfile-text
The Subtractive Helix is broken and very buggy. But it is the most reliable way to get a screw and nut in the software.
minus-squareRemy Rose@piefed.sociallinkfedilinkEnglisharrow-up5·2 months agoOooh neat!! Is this intentionally designed to be more 3d printable than standard threading? That’s a good idea
minus-squarethe16bitgamer@programming.devOPlinkfedilinkarrow-up4·2 months agoThat’s the idea, though I think I’ve settled on 0.4mm crests and a pitch of 1.6mm. Still testing but the results I am seeing are fantastic… so long as you don’t use an electric drill
Oooh neat!! Is this intentionally designed to be more 3d printable than standard threading? That’s a good idea
That’s the idea, though I think I’ve settled on 0.4mm crests and a pitch of 1.6mm.
Still testing but the results I am seeing are fantastic… so long as you don’t use an electric drill