I want to mount a printed part to a standard 2mm motor axis which doesn’t have any dents or profile. Its just round. If I print at exactly 2mm, it fits for the first few times until it gets too lose and the spinning part sometimes falls off.

  • Linsensuppe@feddit.orgOP
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 months ago

    But doesn’t that create an offset weight? My part will probably spin at several thousand RPM.

    • EmilieEvans@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      2 months ago

      What is the plastic of your choice?

      PLA, PETG, … behave like a very slowly flowing liquid as such the print will deform/expand (creep).

        • EmilieEvans@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          2 months ago

          For production parts look at other materials. Nylon might still be within the range of your 3D-printer.

          For attaching: If you can’t clamp then look at gluing it in place. If you need it detachable maybe drill a hole in the shaft and use a R-clip.

          You can also tap and die the shaft on top. Make sure to use a left or right-handed thread depending on the rotation/load (thread is so that the rotation/force isn’t unscrewing it).