petey@aussie.zone to 3DPrinting@lemmy.worldEnglish · edit-22 days agoFriendly reminder to print awkward models on an angleaussie.zoneimagemessage-square17fedilinkarrow-up1148arrow-down10file-text
arrow-up1148arrow-down1imageFriendly reminder to print awkward models on an angleaussie.zonepetey@aussie.zone to 3DPrinting@lemmy.worldEnglish · edit-22 days agomessage-square17fedilinkfile-text
This is a battery cell case that was a pain last time I printed it with supports Model: https://www.thingiverse.com/thing:5240533/files
minus-squareTest_Tickles@lemmy.worldlinkfedilinkEnglisharrow-up5·1 day agoIn Orca slicer, if you use tree supports and hybrid, an option appears (advanced must be enabled) for something like “Essential supports only”. It is so much better than spending all that time adding or blocking supports.
minus-squareanguo@lemmy.calinkfedilinkEnglisharrow-up1·3 hours agoWould that be equivalent to PrusaSlicer’s “automatic painting”?
minus-squareTest_Tickles@lemmy.worldlinkfedilinkEnglisharrow-up1·39 minutes agoI have no clue about that. I only recently stumbled across the orca setting while waging my own battle against excessively aggressive supports.
In Orca slicer, if you use tree supports and hybrid, an option appears (advanced must be enabled) for something like “Essential supports only”. It is so much better than spending all that time adding or blocking supports.
Would that be equivalent to PrusaSlicer’s “automatic painting”?
I have no clue about that. I only recently stumbled across the orca setting while waging my own battle against excessively aggressive supports.