Hey all

Looking for some suggestions on hardware I can use for a SAN solution. I have esx running on a R620 and R630. Playing around with vcenter and migrating VM’s. Would like to dip my toe into iscsi or similar solutions. Ideally I’d want something that can support PCI bifurcation… Cause much like everything homelab related, I’m likely going to get carried away.

FC is an option I’m willing to consider to connect everything as I’m basically out of 10G ports on my switch until I can get around to configuring my brocade

  • Warm_Soup@alien.topOPBEnglish
    1·
    11 months ago

    I have an old HP t620 Plus kicking around from when I used it for pFsense… I could probably try and install something on that. You mentioned SolarWinds, is that free? (I guess I can google around to find out as well).

    I’m not really sure what this thing has in it, so maybe I’ll crack the shell 1st and see what I can do to add storage if needed.

    • CanuckFire@alien.topBEnglish
      1·
      11 months ago

      I caught a mistake, it is Starwinds san and there was a full-featured free version. They seem to have updated their page so I am less familiar with the new vsan software so dig into it if you are curious.

      I did spin up ESOS as well and that is a fairly simple thing to start up if you just want to try and build a volume to test out.

      Your t620 is an AMD APU with some sata and PCIe. You can probably just put in an SSD to see how it goes and scale up to new/bigger hardware if you want.

      I know that I still have a bunch of FC hardware and it is pretty cool tech. Super low latency purpose built storage protocol.