I mean no harm.

  • 1 Post
  • 75 Comments
Joined 1 year ago
cake
Cake day: July 4th, 2023

help-circle
  • permanently attached USB SSDs are supposed to be mounted

    Just mount them somewhere under / device, so if a disk/mount fails the mounts depended on the path can´t also fail.

    I keep my permanent mounts at /media/ and I have a udev rule, that all auto mounted media goes there, so /mnt stays empty. A funny case is that my projects BTRFS sub-volume also is mounted this way, although it is technically on the same device.


  • For example, the new .config directory in the home directory.

    I hope slowly but surely no program will ever dump its config(s) as ~/.xyz.conf (or even worse in a program specific ~/.thisapp/; The ~/.config/ scheme works as long as the programs don’t repeat the bad way of dumping files as ~/.config/thisconfig.txt. (I’m looking at you kde folks…) A unique dir in .config directory should be mandatory.

    If I ever need to shed some cruft accumulated over the years in ~/.config/ this would make it a lot easier.


  • They could be very well using the earth’s orbit around the sun to get better resolution - two data points from opposite sides of the orbit. What I know is that the largest “virtual” radiotelescope is literally the size of earth. The data points are synced with atomic clocks (or better), and a container of harddrives gets shipped into a datacenter to be ingested. Thats hundreds of streams (one per antenna) of data to be just synced up, before the actual analysis even can begin. (I’m just guessing after this) At this point, you have those hundreds (basically .wav files) lined up at timepoints they were sampled (one sample, one timepoint column). So row by row, so you can begin to sort out signal phase differences between the source rows.

    I.e to put it shortly: an image is not taken, it is inferred and computed. Not that you even could in the first place, it’s a blackhole after all.


  • I have begun to see that YT is being hostile to adblocker users - and this worries me. I assume YT is already probing the clients to see which are circumveting the ads.

    I had an (let’s say unconventional) idea at one point: an add-on which only purpose is to show the YT ads in the background which uBO blocked. All of the blocked ads would be played (eventually) - except that the user can just ignore this happening in background and wouldn’t be actually seeing the ads. I.e. the browser would just move playing the ads into a background container not visible to the user.


  • Jokes on merge… when a rebase editing goes wrong after +15 commits and six hours, and git hits you with a leadpipe: “do it. Do it again, or reassemble your branch from the reflog.” I.e. you commited a change very early, went over bunch of commits resolving/fixing/improving them and at middle way forget if you should commit --amend or rebase --continue to move forward. Choose wrong, and two large change-sets get irreversilbly squashed together (that absolutely shouldn’t), with no way to undo. Cheers. 👍




  • I tried Luks and BTRFS more than 6 times leading to a script error each and every time.

    This was actually my experience also, so I went back to a manual install to just get it done. I think the archinstall script won’t get any configuration of device-mapper/LVM right (including disk encryption with cryptsetup). The disk encrypt setup had even more hoops to go through than just LVM.





  • Why would learning be gatekeeping? I wish I could just teach my secrets… The manuals are only a shallow guide to knowledge. E.g. ls, has condensed for me to ls -laR mostly, and that ls<tab> usually gives tools that list something. ch<tab> gives tools to “change something”, like chmod. mk<tab> to “create something” mkdir etc.

    I may navigate in the terminal, but putting me at front of Blender etc. and I’m back to crawling speed of RTFM, and all I would see is a zoo of buttons.



  • H̢̱̀e͖ͧ͘r͈̔́e̖̅̀ͅ ḩ͒͏̩̲ẹ̽ͯ̀ c̔͑͠҉̬o̢̢̠̜̓̚m̷̻̳ͧͪ͘ę̢̥̋̀s̢͈̲ͧ̀͜ͅ,̧̔͞ͅ f͖͗̿̕͝ȅ̴̶̩̂͟a̸̡̯͈̼͋͡s̗̋̀̀̀̀͟t̒̾͏̯ y̸̛̟̽̇o̢̟̜͂͆ͯ͘͜u̧̧̜͔͇ͭͫ́̚͞r̀̃͑̓͒͏̮ e̍̒̇ͯ҉̴̲̭y̷̰̖ͨ̑͜e̓ͭͭ͂̕҉̸̛̦̱̤̫͢s̡̛̫͋̕ o̢͉̘͚̤̅ͫͤ̓ͭ̕͡n͊͘҉̲̟̖͔͝͞ t̷̟͊̽h̨̦͎̅̄ͪ́̚͘͠i̶̢̛̬̞̦͊̅̏̀́s̶̸̢̹̹͕̩̜̣̎ͫͤ͐̈̀.̛̰̼̗̺̼͗ͣ̏́̚͟͠.̵̪ͥ̈̚̚͞ͅ.̷̶͎̞̳̘̈͋ͬ̈͂͒͠ z̸̛̫̓͜͟͡ḁ̧ͨ͊͗ͫͫ̅́͢͠͠l̵̴͒͏͚̥̻g̩͎̲̼̠̿̅ͩ͌̇͟o̢̝͍͔͍̼̼ͤͦ̎́͘͝ i̷ͧ̅̂͟͡͠͞҉̸̙̱͍͈̝̠̺̀ͅs̗̮͇̪̯̋͋́̕ t̵̶̛̰̘̰̫̬͖̜͗̒͗̉̿͌̀̀͢ẖ̴̴̡̭̪̉̌̈́͗͘e̵ͬ̃ͬ͌͆̍͏̧̡̧̦̘͇͕͙̳̹͜ ạ̳̺͎̤̺̖̠̔̈ͮ̉̌̓̀́͟͢͞͞n̊͏̰̖̘̖̭̰̖̕͢ş̴̽͘҉̮̞̼̱w̨̢̠̻͐̐͑̊͢͞e̢̡̛͖̙̟̣͋͆͘̕ͅŗ̧̯ͪ͘͘͜͡.̭̘͇͓̹̻̖̖͉͊ͪ́


  • The time you took to answer the archinstall questions and what would take to do them manually is (nearly) the same. The manual way is that you are forced learn the system (which does take time), and it’s thus more exact of what you want. Once you successfully boot a manual install on a bare hardware, you’ll get all the swag. ;)

    (I was lazy last time I had to do a full install, and I prepared the system almost entirely in a VM, for which I used the physical disk I would finally boot it from. The final step was to chroot’d into the nearly complete system and make it boot outside of the VM…)


  • JATth@lemmy.worldtolinuxmemes@lemmy.worldfree license key included
    link
    fedilink
    arrow-up
    7
    arrow-down
    5
    ·
    edit-2
    1 month ago

    I actually don’t get the fuzz/meme about Arch Linux. Yes, the installer drops you into a shell where you need to fix the keyboard layout for starters and the next thing is preparing enough disk resources for the OS which is somehow ungodly hard. My point is that if you can’t then you are not qualified to maintain the installation, or actually RTFM and start to fr think what you do.





  • The NT kernel in isolation is apparently quite “ok”, from what i have heard of it. It’s the spyware, malware, driver crap (“windows”) running on/using it which is unquestionably totally fucked and disgusting. If they were to FOSS the NT kernel, I could maybe support an such endeavor.