I don’t know how the various options here work, BUT you might also appreciate them too https://libredirect.github.io/index.html (this is where I found the other link)

Seems a good time to drop this here https://breezewiki.com/

As an extra to all that’s being said so far, a food safe material doesn’t mean it has a food safe pigment in it. To be honest, if all you’re going to put into the prints are packaged items (say the tea bags) then meh, not much of a big deal IMO.

This reminds me that it’s a new month, and time for a backup. Thanks!

Those are quite the minimum specifications to run it! Damn! Have they ever heard of “optimization”? Because in 4 minutes, SD 3.5 medium got

out of my iPhone 13 Pro, running locally… with a total of 6gb of system ram. So I’m going to say that 32 gb AND a RX 7900 are a little laughable (even if much faster no doubt).

You might have some polypropylene there. Really strong material! Won’t stick to shit, temperature resistant, chemical resistant, can bend without breaking… never tried it, personally but it’s interesting stuff.

Sounds like TPU? Maybe soft one too.

Thanks, I think I get it. There’s a lot of humidity where I live too, so while not at the same scale, the problems are at least relatable. Best of luck with the project, it sounds like a cool but lengthy and complex journey that can really pay off!

Oh! The “brassic” guy! I don’t have much help to offer, but I didn’t know that term, had to look it up and found the tv show :D so thank you.

A tiny bit of potential help: you mention wanting to use desiccant in the boat. I’m obviously not an expert, but it sounds like a bad idea, as the stuff absorbs water… but maybe you mean in small amounts, so that wouldn’t make a difference.

Had access to cli, restarted HA and quickly disabled the Alexa integration: so far everything is working as intended :)

Similarly unfortunate situation for me, using the backup didn’t really help. But I DO have the Alexa integration, I guess next time I get HA between reboots I’ll disable that.

I think on my system it’s causing reboots. Not fun.

I have a few examples that I hope retain their metadata.

Seed mode is… basically, I stopped using Automatic1111 a long time ago and kinda lost track of what goes on there but in the app I use (Draw Things) there’s a seed mode called Scale Alike. Could be exclusive, could be the standard everywhere for what I know. It does what it says, changing resolution will keep things looking close enough.

Edit: obviously at some point they had to lose the bloody metadata….

“Better quality” is an interesting concept. Increasing steps, depending in the sampler, changes the image. The seed mode usually changes image with changes in size.

So, what exactly do you mean with “better quality”?

I’m thinking it looks like the print gets to a spot where it can get faster, and your hot end can’t keep up with the temperature required by that filament, causing under extrusion. If my guess is correct, it would show on a small test print (same settings) where you get looooong straight lines to allow for speed. And would disappear by slowing down. Since it looks like a relatively expensive filament I suggest you wait for more feedback before trying my test, just in case I got it wrong and my test would waste some filament for nothing.

Fortunately my thermometers don’t do that, because they are a good choice, Zigbee wise. Always on the lookout for replacements, if the need arises…

The bloody morons… why they say 16 tops if it can do better? It’s not like they don’t have access to 16gb sticks to test 2 of them! Like, I get when it’s “this supports up to” and that’s the largest available at launch, but this is just stupid. Thanks for correcting me!

super easy to upgrade to 32/48gb

Not on an N95/97/100 as they support max 16… https://ark.intel.com/content/www/us/en/ark/products/231803/intel-processor-n100-6m-cache-up-to-3-40-ghz.html so they can be repaired, but not upgraded.

This isn’t what you asked specifically, but it’s related enough… have a look into https://apps.apple.com/it/app/draw-things-ai-generation/id6444050820?l=en-GB as it’s free, ad free, free from tracking and really well optimized. With that I can run Schnell on my iPhone 13 Pro!

Yep. No artistic skills here, fun shitposts like this one for me are only fueled by some sort of generative AI. In this instance I tried a few different models (initially I got a woman with a red shirt uniform and a bee logo, then a red shirt with yellow and black highlights, a different model gave me a buff, hairy bee in a red shirt uniform… on top of the enterprise, holding a small enterprise in a hand) but had to give up and use Flux even if it’s the most intensive to run. Hardly perfect, but it’s fun and easy to recognize :)