I’ve tried watching it about 5 times and get to different points before I burn out.
It has sparked an interest in the works of R.D. Laing for who Lain is named in reference to.
A Psychologist who was active in the 60’s and is famous for their work with schizophrenics; I’ve been curious if their work may give a bit more context to understand Serial Experiments Lain
You uh… you doing ok, OP?
Doesn’t it provide a safe way of preserving food that housing built before personal refrigeration became common won’t have (a larder, basement, or even shaded garden)?
Methods of refrigeration become especially important if you do not have a regular way of retrieving food.
Not to mention, even cooked vegan food can and will spoil quicker without refrigeration.
My mum’s a child psychotherapist, from her perspective medication aught not to be the first thing people jump at, but it very much has it’s place; an example being children with ADHD who literally cannot sit down to the point of them getting distressed, actually being able to sit down and engage with therapy after starting medication. Similar things with anxiety and depression, if anxiety holds you back from opening up and personal thoughts and feelings then medication can enable that for therapeutic work to begin.
The bigger issue she has is when people (often parents) only want the medication but don’t want to try and engage with the therapy.
Just something to think about
Yeah, you say twot to an English person and they’ll look at you like you’ve sprouted a third head.
The correct way to pronounce it is twat:
The twat in a hat came at me with a bat.
As opposed to:
The THOT whose a bot sent me her twot.
Huh, same here, that’s odd
I’m honestly surprised no-one has built an extension to automatically opt out of them, or at least the major cookie providers interfaces.
I realise there are many extensions which outright block cookies, etc; I’m meaning specifically the annoying dialogues you describe
Wow, 3DS as well…
Wait, PSP‽
My brother in Christ, how much do you know about housing? Renovations? Insulation? Mycology?
The standard that likely had not been followed was ensuring that the property was watertight to begin with.
The dry rot that is spreading through their house is effectively going to condemn it.
Your take of “hurdur, how hard could it be to do some insulation? you glue on the boards, mesh and render” is asinine at best.
Lots of these companies didn’t do their due diligence to ensure the suitability of the properties before installing.
Which then disproportionately effects people who are less likely to be able to afford repairs due to them already being on very limited lower incomes, the exact reason why they are getting this work done via these schemes.
I took wouldn’t want to trust the same company that put me into that position to be the one to rectify it.
Last November, the allotments at the bottom of my hill flooded for the first time since I arrived 4 years ago, this year it’s arrived in October.
Last year it wasn’t until March until they were walkable. I wonder how long it will be this year.
It got to about 4ft last time and seemingly poisoned the land as no-ones crops grew this year. Interestingly plums and pears did pretty well.
If you really want that passive poison effect, you need to get fiestaware: bright orange/yellow ceramics where the concentration of uranium is way higher and it’s used as the glaze!
It’s known to leech into acidic foods, such as tomato sauces with pasta.
I also feel like we can also add antique top hats to this; I recently found out that my grandfather’s childhood top hat, which I used to play with all the time growing up, contains mercury nitrate
Are you meaning because people are excited about “fusion” being a possible future energy source, whereas when they here “nuclear” their minds immediately go to weapons and fission accidents and pollution?
My friend has so far fried 4 or 5 steamdecks, ROG Ally and two power banks before he took my advice to buy a type c cable tester and to stop using any charger that didn’t come with the device until he could test them.
Turned out it was a damaged cable, I think it was a CC line was no longer working.
I’ve had a couple of cheaper Chinese type c and usb A multi port chargers fail; I manage to fry like 3 sex toys before I realised the type A ports were outputting 12v, and at some point something went wrong and the type c fried my phone (which I guess is on me for continuing to use the charger after the issue with the type A ports)
Something semi ambient, preferably without lyrics: Tycho, Bonobo, Nujabes
Oh wow, you must learn manual, that’s ridiculous! Where in the world is that?
I’ve not started yet, but I’m going to learn automatic when I go to learn, my GF has been learning manual for over 2 years because her dad and our friend who drives said that it makes the most sense to, when in reality that’s just because of what they were told based on outdated advice.
She even has an automatic waiting for her once she finally passes, but she’s stubborn and doesn’t want to switch to learning automatic, it’s really frustrating how stubborn she is about not giving up or approaching it from another direction.
She has dyslexia and the British Dyslexic Association even recommends that dyslexics learn automatic as it’s a known thing they struggle with. She even had to write L and R on her hands, bless her.
I’ve heard some people benefit from intensive driving courses, where you do like 2 solid weeks of lessons then take the test, but no clue if they have those in your country
I’ve suggested to her, if she really wants a manual licence then get the automatic licence, then decide if she really wants the manual, as she’ll be more comfortable with roads and driving and can just focus on the manual aspect
You aren’t wrong, but as someone who managed to screw up and damaged the copper traces when trying to resolder an old mini-usb back onto my old keyboard; you do really need to have a good understanding and a lot of practice with SMDs and temperature control.
I went from a less than 50% success ratio when resoldering SMD LEDs to about 95% success after I bought a £20 mini-heatgun with a narrow (5mm) nozzle
+1 for prusa if you want to spend more and get something that just works with no fuss, if you’re wanting to go cheap&cheerful an Ender 3 will be a good option as well if you don’t mind the occasional bit of tinkering for about half the price, as it’s probably one of the most supported printers by the community and newer ones come with Auto bed leveling and half of the fancy stuff you had to add on back in the day.
I’d spend any money saved building/buying an enclosure and something to run octoprint with (Raspberry pi or a spare android phone)
To add, it’s often worth investing in a mini heatgun for desoldering/resoldering, typically it’s near impossible to resolder the pins by hand as they are so fine.
Same with many other surface mount components
They don’t necessarily require a starter explosive, certain types do of course. It’s more about overcoming the initial energy required, for example the arc from an electric arc lighter could probably overcome that requirement in a lot of scenarios.
Also the opposite side to it don’t keep hammering into somebody once they’ve admitted fault and are trying to rectify their mistakes (within reason).
People will be a lot more likely to be confident in admitting a mistake and being honest about it if it isn’t blown out of proportion.