Sounds like you dodged a bullet, if that’s how the CEO reacts to you declining the offer. Just imagine how they’d react to somone actually making a mistake at work

It’s a conspiracy, orchestrated by Big Adapter

They sure is!

Rly? My daily driver is GNU grep

ISS, as in: you get shot into space?

Oh, so they can’t get autonomous driving to work, thus the next step is to get people who are sleeping to steer the cars remotely

Great, good luck with that :)

Another thing that comes to mind: for audio purposes another technique used in ring modulators for audio effects is to use a mosfet switch to mix the signal with a square wave. This has more byproducts than mixing with a pure sine, but is a lot easier to do. Since you are downconcerting, it should not matter at all if you use a square wave, since the byproducts will all be (higher-order) harmonics of the local oscillator, which you’ll filter out anyway.

I’m not sure I understand what you are trying to do… do you want to build a radio? Or are all your signals in the audio range?

Anyway:

• w2aew has some great videos on diode ring mixers, like this one about winding the transformers: https://www.youtube.com/watch?v=a8ViWS61hsU
• You can also get ready-made diode ring mixers (including transformer and everything) like this one: https://www.minicircuits.com/pdfs/SRA-1W+.pdf

Regarding Gilbert cells, the two popular chips are MC1496 and SA631. The 631 comes with a built-in oscillator, so it’s quite handy. Unfortunately both are hard to come by these days.

Does this mean jd vance is a centipede?

Sounds great, except i think this whole thing is about some punching game… Not sure though, i’m not a sports person

Heresy! Australia will always be a planet.

Damn, i was hoping for them to make it slower!

🎉

I can only find pictures of 6-lobed Gamebit screws

I think I found it, it’s this kind: https://ctatools.com/products/5065x12

thanks, this might be just the comment I needed! Some of the screws are sunk into a very deep hole (~60mm), so it would be tough to cut a slot into those. But i’ll give it a try on one of the more exposed screws, just to see if that gets me anywhere.

true, looking at second pic it’s very hard to make out. I tried to capture it on the first picture, but it’s not that good

yeah, it is inverted (or “external” torx according to your link). They also made sure to sink the screws into a whole where no pliars will fit…

Growing plants with LEDs certainly works, I’m just wondering if the power of a USB port is enough

Is this a painting, or actual fruit?

If fruit, how long did it last until the apples turned brown?