Oh no! It’s a _{1 2 3 4 5 6 …………………} ICOSAHEDRON!

Every episode seems to have one joke that really gets me. In this one it was Mariner stopping mid exclamation to make sure she correctly named the platonic solid that’s about to eat her.

If anyone actually manages to get Plasma Bigscreen working decently, please let me know how you did it. I was really excited when I first learned about it, but after considerable time tinkering, I gave up.

My first attempt was to install it on an old laptop. It boots up and looks good, but a large number of the built-in apps hang forever on their splash screen when you try to run them. I also couldn’t figure out how to customize what apps appear in the carousels on the homepage. I’m not sure if that’s because there truly is no way to do it or if the functionality is locked behind one of the apps that I can’t launch.

The Plasma Bigscreen website indicates that it was designed to run on a Raspberry Pi 4, so I gave in and bought one in hopes that using the preferred hardware would work better. I followed the provided links to the latest Manjaro build of Bigscreen (which is over a year old) and installed it on my pi. Unfortunately, that build apparently suffers from a bug that prevents you from even getting past the login screen on first boot up. I don’t remember the details, but I think it was some kind of “can’t log in without setting a password” / “can’t set a password until you log in” loop. Anyway, I found a forum post discussing the problem with no solutions found, so I gave up on the manjaro build.

My final attempt was to install an ordinary desktop Linux distribution on the pi and then use the package manager to install Plasma Bigscreen as an alternative desktop. This got me in, but there were still a bunch of broken apps. It was about this time that I also realized that the original Bigscreen concept seemed to lean heavily into voice control via Mycroft AI. Mycroft has gone through some major changes since the project launched, and I think these changes have resulted in basically all Mycroft related code in Plasma Bigscreen being broken. That may or may not be related to the other problems I had. I never got to experience a fully functional version of the software, so I have a hard time knowing what exactly is broken in what ways.

Anyway, that’s my experience with Plasma Bigscreen. I hope this doesn’t come across as hating on the project. It should be evident from the amount of effort put in that I really wanted it to work, but in the end I had to conclude that in its current state, it’s badly broken with no sign of improvement or repairs.

Helpful tip: there’s a setting in Firefox to block all notification requests. It’s under Settings > Privacy & Security, then scroll down to the Permissions heading. Click the “Settings…” button next to the the Notifications entry and tick the box for “Block new requests asking to allow notifications”.

I assume there’s an equivalent in Chrome, but I don’t know what it is off the top of my head.

Ninja edit: Removed my attempt to hyperlink directly to the relevant Firefox settings page because it wasn’t working.

I agree. The concept is simple, and it’s not perfect, but it isn’t dumb either. This is basically recreating how coal and oil got in the ground in the first place. Plants absorbed carbon from the air as they grew, then they got buried in a way that prevented them from decomposing and re-releasing it into the atmosphere. My main question here would be whether burying it only 10 feet under ground is really enough for long term storage. The other big elephant in the room with carbon capture is that it can be a convenient excuse for companies to avoid doing work towards actually decarbonizing their operations. If, as the article suggests, this is used primarily by industries like cement making that don’t currently have a way to become carbon neutral then it’s a good thing. If it’s just used as cynical green washing by companies who could be doing better, then it’s at best a wash, and arguably a net negative.

If you were actually hoping to buy one but the rounded corners are a dealbreaker, then you may be interested to know that the DIY edition lets you mix and match the older display with the newer motherboards. Looks like opting for the older display even saves you $130 on the purchase price.

I second weawow. It’s got everything I want in a weather app: clean UI, customizable homescreen widget, and you can pick which provider it uses for the weather data.

Out of curiosity, what software is normally being run on your clusters? Based on my reading, it seems like some companies run clusters for business purposes. E.g. an engineering company might use it for structural analysis of their designs, or a pharmaceutical company might simulate the interactions of new drugs. I assume in those cases they’ve bought a license for some kind of high-end software that’s been specifically written to run in a distributed environment. I also found references to some software libraries that are meant to support writing programs in this environment. I assume those are used more by academics who have a very specific question they want to answer (and may not have funding for commercial software) so they write their own code that’s hyper focused on their area of study.

Is that basically how it works, or have I misunderstood?

This actually came up in my research. Folding@Home is considered a “grid computer” According to Wikipedia:

Grid computing is distinguished from … cluster computing in that grid computers have each node set to perform a different task/application. Grid computers also tend to be more heterogeneous and geographically dispersed (thus not physically coupled) than cluster computers.

The primary performance disadvantage is that the various processors and local storage areas do not have high-speed connections. This arrangement is thus well-suited to applications in which multiple parallel computations can take place independently, without the need to communicate intermediate results between processors.

I’ll have to look a little more into the AI stuff. It was actually my first thought, but I wasn’t sure how far I’d get without GPUs. I think they’re pretty much required for Stablediffusion. I’m pretty sure even LLMs are trained on GPUs, but maybe response generation can be done without one.

I’m not sure what you’d want to run in a homelab that would use even 10 machines, but it could be fun to find out.

Oh yeah, this is absolutely a solution in search of a problem. It all started with the discovery that these old (but not ancient, most of them are intel 7th gen) computers were being auctioned off for like $20 a piece. From there I started trying to work backwards towards something I could do with them.

I was looking at HP mini PCs. The ones that were for sale used 7th gen i5s with a 35W TDP. They’re sold with a 65W power brick so presumably the whole system would never draw more than that. I could run a 16 node cluster flat out on a little over a kW, which is within the rating of a single residential circuit breaker. I certainly wouldn’t want to keep it running all the time, but it’s not like I’d have to get my electric system upgraded if I wanted to set one up and run it for a couple of hours as an experiment.

Searx is a search aggregator. It masks your identity from the search providers, but under the hood it’s still just a middle man for google/bing results. I don’t see how this helps if the results themselves are getting worse.

Nice 'course there’s an Emacs command for that.

You might be interested in the pop-sci book Soonish: ten emerging technologies that’ll improve and/or ruin everything. I haven’t read it myself, but I’ve read the authors’ other book about space colonization, and it was excellent so I would expect this one to be as well.

Suddenly I want to see a super smash bros knockoff where all the playable characters are public domain, and every January 1st they release an update with new characters that lost copyright protection in the past year.

Relevant XKCD

I believe that, legally speaking, a company making a public effort to maintain their trademark counts for a lot. The company that makes Velco may not care at all whether this video convinces anyone to actually change their behavior. It exists so that they can hold it up in court and say “look, we have been putting real time and money into defending this thing, therefore we should be allowed to keep it.”

This is the one I came here to say. For anyone living in or visiting Chicago, the Garfield Park Conservatory is a lovely place to spend a few hours on a cold winter day.

Are there any viable alternative sites you’re aware of?

Slightly off topic, but as long as we’re ranting about DNS…

Proxmox handles DNS for each container as a setting in the hypervisor. It’s not a bad way of simplifying things, but if, hypothetically, you didn’t know about that, then you could find yourself in a situation where you spend an entire afternoon trying every single one of the million different ways to edit DNS in Linux and getting increasingly frustrated because the IP gets overwritten every time you restart the container no matter what you do, until eventually you figure out that the solution is just like three clicks and a text entry box in the Proxmox GUI!

…Hypothetically, of course.