I actually read that 2 or 3 times wondering why T and G were circled, wondering what was the issue here….then I finally noticed… maybe whomever the email was sent never even noticed!

That’s about how i figured it would be…seems like it would be kinda weird to get right, and even then you kinda need that reassurance of a good pat 😆

Man…i remember, and will never forget, going to see this in the theaters. Was not ready for what this brought!

I saw it again later on dvd with the alternate ending…i think the alt ending makes it all even worse…obviously that’s the point, if you’ve seen it, but still….😩

This movie totally messed me up for anything involving caves. Imagine my anxiety reading about that Nuttypuck Cave deal (i forget the actual name, but IYKYK…)

They exist. I think primarily a Japan thing (no surprise…). I havent seen one in person, but seen them for sale or some weird bidet article about all the options you can get. Hot/cold water, his/her’s, blow dry, lights, music, multiple user pre-sets, etc. usually it’s sold as the entire toilet, not an “add-on” option.

Nope. White are real people, too. You respawn white back at the beginning (i think you have the option to, so you could stay red as well) if you managed to find all the glyphs. Ive been the White Traveler lots of times.

Why does no one peel their shrimp before putting them in dishes to cook? They are so much easier to peel raw and then you arent trying to scoop a shrimp out, messily peel it while covered in sauce or whatever, then you put it back in and then try to eat…Like, the legs are still on here…so you’re likely gonna have random shrimp legs in some bites… Even if the shrimp you got are pre-cooked, just peeling them during prep makes enjoying the final product waaaay better.

Ha, as i was typing that i considered the possibility your car might be a diesel, but decided otherwise….go figure! But ya, as the others have said, there is also diesel stabilizers, but diesel does have a longer life span. Putting a stabilizer in wont hurt anything, so personally, id put it in anyways just to be safe….

Yeah, for the most part. The other commenter is right about that battery, tho. Disconnecting the battery will help, but depending on the type and age of the battery (and temperatures in the storage area) the battery might still not last. Trickle charger might be ideal here, even just a little solar panel for it.

Gas in the tank is another thing. There might be conflicting opinions on how best to handle this, but- I would run the tank as empty as practical, then fill it up completely (so you have all fresh gas) and add a stabilizer. Most stabilizers will keep the gas good for 1-2 years. Best to make sure its an Ethanol stabilizer (like Sta-Bil 360), unless you put pure gas in. Then make sure to drive it a little so the stabilized gas gets into the whole fuel system.

Otherwise, give it a good wash and then a cover for it if you can if it’ll be outside in the elements. Depending on the storage environment, things could still start growing on it, inside and out.

Same here, lived in a few different states and usually never got out of the first “tier” pricing bracket (where this billing method was used), so my water bills were pretty much to the penny the same every month.

Im gonna be the AkShUalLy guy here and say this isnt always the case…. There are shower controls that turn on immediately to full pressure and then adjust for temp as you keep turning, no way to actually control the water pressure without just having fully cold water. These have been around forever…

I installed a newer Delta one in my house a few years ago (2021 or so). They now have a feature where the water temperature is always whatever you set it- no fluctuations of scalding water when someone flushes a toilet or random freezes if someone turns on hot water elsewhere in the house. Or even 2 showers/baths fighting for hot water at the same time. So it’s like an auto-adjusting thing that happens inside that requires max input pressure to work right. Of course, i always want max water pressure, so this was a win-win for me!

To note- this wasnt a crazy expensive, high-end model…it was basically what most of the single knob/lever shower controls are now.

Glad i could help!

I didnt even consider angle mounted control arms! Sorry about some semi-wrong info then….!

Your Imgr link isnt working for the picture, but i have seen the style you’re referring to…i just didnt think about them while typing out my reply! So that all makes sense then.

Let me/us know what you get figured out! Always fun to learn new stuff!

Toe out is the front of the tire being too far out…i think you mean Camber, where the top/bottom is too far out/in. Unless you have rear wheel steering, there’s no way a lift or drop would change the toe of rear wheels. Tie rods are used on the steering system, coming from the rack and pinion. Again, unless you have rear wheel steering, these dont exist on the rear wheels.

You’re looking for control arms.

Likely with a lift installed you got really positive camber (bottom is too far in). You either need longer lower arms or shorter tops, this varies depending on vehicles. However…these parts should have come with your lift kit? Unless it wasnt a kit and you assembled the kit yourself with various other parts. A complete kit would have had the parts to correct any geometry changes associated with the lift. Also, it looks like your setup uses 3 control arms on each side…2 lateral (top & bottom) and one coming in from the rear, so you might have a few parts that need extending to do this job correctly.

If you have this issue on the rear, how was it solved for the front? You said front tie rods were adjustable enough, but since you arent using the correct part terms it’s hard to know exactly what you’re referring to.

You’ll have to find someone that makes aftermarket control arms for your specific vehicle, there wont be any factory sized parts to help with a non-stock situation. Or get ahold of whoever made your lift kit (if it was a kit) and see what they recommend.

Best to go to a source (forum, community, etc) specific to your vehicle to see what kits, parts, vendors and sources people are using for lifts.

My experience with lifting not-so-common vehicles always made finding parts/kits like this difficult. Sometimes i even had to make the part myself. Usually, if anyone makes the part it’s not a huge supplier, just a few guys in a shop somewhere. Or someone with more resources found an OEM part from a completely different vehicle that worked.

Yup, that’s it. I remember now being told it was ice crystals or water droplets or something that caused the effect, like that article explains

There’s obviously some fancy science term for that, but we had something “less smart” we used to call it as kids. There was some “old ways” thing we were taught that depending on how many stars were caught in that halo was how many days until the next rain…. Maybe someone else will shed some better info, but your comment reminded me of that!

A true “hand cannon”, to make a Destiny reference. I never knew low-bore handguns could/would be a thing and always thought that was sci-fi magic in video game guns that didnt have to make sense. Destiny had a lot of low-bore hand guns…guess the devs werent that crazy!

Ehhh, i still disagree, because that doesnt make sense. Less congestion with less lanes? The extra lanes are added to ease the growing congestion in an area. OP asked about traffic engineering, there is it very simply. Adding lanes doesnt magically create more cars on the road.

I’ve seen the exact opposite in places like Hawaii when they expanded H1 at Honolulu, shrinking all the lanes down to the minimum 8ft so they could add another lane. Now at, I think 6 lanes each way, in places. No space to expand, so the lanes were shrunk to make room for another. You know what adding another lane did? Lessen congestion. Sure there’s still congestion, but it’s way better. They, and other big cities (ie- San Fransisco), literally add and change lanes throughout the day (zipper lanes) to ease congestion. Or even legally allow the shoulder to become yet another lane during peak hours. Because more lanes = more flow.

I’ve also seen what happens when the extra lanes arent open (like the zipper lane cant function because the truck is broke) the whole place is gridlocked taking people up to 9 hours to get home. Because of 2 less lanes.

Not just in America. Places like Auckland, NZ and their famos Nippon clip-ons. If adding lanes added congestion just because of the fact that there is more lanes, then why are roads expanded in the first place? Everything should just still be 2 lane roads.

Would you say those dice are…weighted?

Not always the case, but you’re not wrong. Most of the times the new road or added lanes was needed because the traffic density had already increased. Kind of a chicken or the egg scenario. For a new road, well roads arent just built for no reason…obviously the road was needed, so now there will be traffic on it. Sometimes even just an influx of people using the new “alternative route” because they think no one will be on it from the old route, yet many other people had the same idea.

Exception to all this, however is evacuation routes. I grew up in the south, on the gulf of mexico. When hurricanes are coming and everyone is trying to leave, you need those huge highways. 30 years ago you would just have 1000s of people grid-locking 2 lane highways just trying to get anywhere away from the storm, and in some cases being stuck in their car for the storm. Now a lot of those highways are full-on 4 lanes with medians, huge shoulders, etc. These are everywhere across the south, more still being built. Even extra bridges built across bays and sounds that are largely unused (usually have high tolls). 99% of the time the big highways are mostly empty (which makes road trips super nice!) and someone not familiar would think it’s a huge waste. But come an emergency situation, and their purpose is served!

I came here to say the same thing (not sushi) then saw the other pictures. Okay, fine, downvote removed, lol.

That’s a good point. I’m using Memmy on iOS, but havent tried anything else. I’ve been meaning to try something else cause there’s a few other things on Memmy that bug me, so i’ll probly give Voyager a shot. I figured it was an end-client issue, so that must be the common thing, especially if jackoneill confirms Memmy as well. Once he gets back from his Startgate mission, of course.