I’m curious what you’ve been doing with it, what workarounds and fixes you’ve had to do over the years?

  • viking@infosec.pub
    link
    fedilink
    arrow-up
    36
    arrow-down
    1
    ·
    7 months ago

    We run it in a lab, one of the microscopes we have is no longer maintained, and there is no driver for a modern OS.

    It’s completely offline though, we copy the images onto a flash drive and then move them over to the production system manually, so there’s no need to update or fix anything just yet. It’s the same old computer. I’ve got a full set of replacement hardware though, just in case.

    • lud@lemm.ee
      link
      fedilink
      arrow-up
      8
      ·
      7 months ago

      Make an image of the whole computer if you can.

      One day the hardware will die and it will probably run on semi modern hardware if you have a backup of the original drive.

      • Otherbarry@lemmy.zip
        link
        fedilink
        English
        arrow-up
        4
        ·
        7 months ago

        Something like that is more likely to work if it’s the same exact hardware, an XP image applied onto a totally different system is likely going to BSOD when all the current drivers it has installed suddenly stop working. And XP being XP, you’re not going to find new drivers for new hardware.

        A lot of these XP machines running other hardware also have their own specific drivers and long unsupported proprietary middleware installed that won’t transfer onto new systems easily.

        But I do agree with you on the disk image, if only the hard drive on that XP system dies then that’s an easy fix. Worst case OP would have to hunt around for an IDE drive if that desktop is particularly ancient.

      • viking@infosec.pub
        link
        fedilink
        arrow-up
        3
        arrow-down
        1
        ·
        7 months ago

        Sure, I have an image and 2 or 3 identical HDDs to restore them to. I have my doubts the image would mount as a VM, but I can install a fresh XP in a VM and then try to restore the drivers. I’d only have to find a way to access a serial port - I know they exist as USB adapters, but can’t be sure the software would recognize it accordingly. Would have to recognize it as a serial in the host OS and then pass through to the image. Which in theory should work, but in practice I’ll only touch it when it becomes a necessity. And luckily there’s a million old computers for cheap on ebay, so I hope I can just wait it out until the microscope eventually retires. It’s been long since written off, and I believe there were plans to replace it within the next 5 years, max.