Always the first thing I turn off, but surely there are some people out there that actually like it. If you’re one of those people is there a particular reason?

  • MP3Martin@programming.dev
    link
    fedilink
    arrow-up
    1
    ·
    25 minutes ago

    When i enable it, it makes it so blurry that i can only properly see stuff when i stop moving my mouse. Is that because of low framerate? (happens in nearly every game that i try to enable it in, even when setting motion blur to the lowest amount)

  • yeehaw@lemmy.ca
    link
    fedilink
    arrow-up
    2
    ·
    51 minutes ago

    In single player games it gives me this sorta intense action feel, and I enjoy it.

  • Xenny@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    6 hours ago

    It depends on the implementation. Properly Implemented motion blur can look rather pleasing. Also with new frame generation tech motion blur really helps smooth out the in between frames I’ve found.

  • TriflingToad@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    6 hours ago

    It smooths out the framerate, also it looks better to me 🤷‍♀️. I’ve been playing games since I was little so I don’t really get nauseous from it like others in this thread.
    I have a pretty high end computer but also keep it on playing games on my Steamdeck too.

  • Sequentialsilence@lemmy.world
    link
    fedilink
    arrow-up
    105
    ·
    2 days ago

    Only for very specific games, and only because I don’t have a high refresh rate monitor.

    If I’m in Forza driving 200 km/h I shouldn’t be able to see the bricks I’m flying past. With my low refresh rate monitor I can, so adding just a hint of motion blur really helps add that flourish of immersion that I can’t get with my setup. But that’s again very specific games and only because I cap out at 60fps.

  • EnderMB@lemmy.world
    link
    fedilink
    arrow-up
    31
    arrow-down
    2
    ·
    1 day ago

    It’s something I give so little of a shit about that this is probably the first time I’ve really thought about it, ever.

    So probably that.

    • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      1 day ago

      DoF is hit or miss depending on the game, for me. I turn it off in games that have rather poor context sensitivity for what it blurs, but I’m okay with it in games where it only applies to, like, ADS. The former I hate because there are so many times I’m trying to get a good look at something, and it constantly blurs what I’m looking at because it’s too close, or too far, or the cross hair isn’t exactly on the right pixel, etc.

      Playing MGS5 again recently and it annoys me that I can’t turn DOF off (at least on PS5) because it works the way I dislike.

    • stevestevesteve@lemmy.world
      link
      fedilink
      arrow-up
      25
      arrow-down
      3
      ·
      2 days ago

      In my experience it’s much more likely to CAUSE frame drops than mask anything in a good way. It sure masks visual detail though

      • BougieBirdie@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 day ago

        I also have the impression that motion blur causes frame drops. Then again, some games do seem to hiccup when turning regardless of if motion blur is enabled.

        Now I’m wondering if it’s causation or just correlation. Intuition suggests that additional post-processing would at the very least exacerbate frame drops even if it doesn’t cause them itself, but I’ve never done a deep dive to find out.

        • Ookami38@sh.itjust.works
          link
          fedilink
          arrow-up
          4
          ·
          1 day ago

          In my experience it’s correlation. Motion blur shouldn’t be a particularly expensive operation. Objectively, yes, it will cause some degree of slowdown, just by necessity, but it really does do a decent job of masking those brief FPS hits.

          My rig isn’t the most up-to-date. I’m also extremely sensitive to a lot of the artifacts that come from not having a consistent FPS. Vsync does a decent job of preventing those issues, but the slowdown dropping from 60 to 30 fps is very jarring to me, no matter how brief, and some light motion blur really smooths it out for me. Now, you can ABSOLUTELY overdo it, and that makes it worse. Usually I use the lowest level available, and the slowdown is preferable to overdone motion blur usually.

  • Shapillon@lemmy.world
    link
    fedilink
    arrow-up
    15
    ·
    1 day ago

    It’s on a case by case basis like the lense flares.

    Do I want a more realistic experience or a more cinematic one?

    Also sometimes it hides some fps drops :p

  • Contramuffin@lemmy.world
    link
    fedilink
    arrow-up
    26
    arrow-down
    1
    ·
    1 day ago

    I genuinely don’t understand why people use it. It gives me massive motion sickness and so I figure out very quickly when games have it on by default

    • Tlaloc_Temporal@lemmy.ca
      link
      fedilink
      arrow-up
      7
      ·
      1 day ago

      70% of the time, bloom is garbage, 25% of the time it’s garbage and is covering up other graphical issues. 5% of the time, it gives some nice depth to light and emphasizes brightness differences, even without HDR.

  • Lojcs@lemm.ee
    link
    fedilink
    arrow-up
    18
    arrow-down
    4
    ·
    2 days ago

    Motion blur off looks like those high shutter speed fight scenes from the Kingsman movies. Good for a striking action scene but not pleasant to look at in general. Motion blur blends the motion that happen between frames like how anti aliasing blurs stairstepping.

    • stevestevesteve@lemmy.world
      link
      fedilink
      arrow-up
      11
      arrow-down
      6
      ·
      2 days ago

      Motion blur in film does that, but with video games, in every implementation I’ve seen, you don’t get a blur that works the same way. Movies will generally blur 50% of the motion between frames (a “180 degree shutter”), a smooth blur based on motion alone. Video games generally just blur multiple frames together (sometimes more than two!) leaving all of the distinct images there, just overlayed instead of actually motion blurred. So if something moved from one side of the screen all the way to the other within a single frame, you get double vision of that thing instead of it just being an almost invisible smear across the screen. To do it “right” you basically have to do motion interpolation first, then blur based on that, and if you’re doing motion interpolation you may as well just show the sharp interpolated mid frames.

      On top of that, motion blur tends to be computationally very expensive and you end up getting illegible 30fps instead of smooth 60+.

      • Lojcs@lemm.ee
        link
        fedilink
        arrow-up
        10
        arrow-down
        1
        ·
        2 days ago

        This is not how motion blur works at all. Is there a specific game you’re taking about? Are you sure this is not monitor ghosting?

        Motion blur in games cost next to no performance. It does use motion data but not to generate in between frames, to smear the pixels of the existing frame.

  • papalonian@lemmy.world
    link
    fedilink
    arrow-up
    38
    arrow-down
    32
    ·
    1 day ago

    Because I like it. There shouldn’t need to be much more “reason” than that.

    People that can’t leave others alone for having different preferences than you, why?

    • ElPussyKangaroo@lemmy.world
      link
      fedilink
      arrow-up
      19
      ·
      1 day ago

      Motion blur in video games doesn’t really work for many people. For example, it induces nausea for me. For others, it makes it difficult to identify and analyze a scene properly.

      The OP’s question asks you why you leave it on. Your answer could very well have ended at “Because I like it”, but you chose to read it in bad faith and proceeded to make it about preference bashing, which it’s clearly not.

    • frayedpickles@lemmy.cafe
      link
      fedilink
      English
      arrow-up
      29
      arrow-down
      1
      ·
      edit-2
      1 day ago

      Perhaps the phrasing is wrong, but you could give op benefit of the doubt and think about what you like about it since it’s the de facto standard. For example, you could say “it makes me feel like I’m actually going faster, but also I just like it and your question is dumb”. Informative and mean at the same time!

      If a gay man asked you “what do you find attractive about women” or the N other combos of that question would you helpfully say “get lost weirdo, I like what I like and there is no point in discussing it”?

      Note while you’re shitting on op, op at no point said your opinion is wrong just that they wished to understand. You’re the bad guy here, with unnecessary hostility in response to a question.

      • papalonian@lemmy.world
        link
        fedilink
        arrow-up
        2
        arrow-down
        12
        ·
        edit-2
        1 day ago

        I’m fairness, I also never explicitly said anything that op said was wrong. Or anything explictly about op at all for that matter.

        Any hostility you can infer from my comment can be equally be inferred from OP’s title.

    • CiderApplenTea@lemmy.world
      link
      fedilink
      arrow-up
      15
      arrow-down
      1
      ·
      1 day ago

      So let’s just stop talking to each other all together, surely there’s no point in gaining other perspectives

      • papalonian@lemmy.world
        link
        fedilink
        arrow-up
        1
        arrow-down
        15
        ·
        1 day ago

        That’s exactly what my comment said! Good job 👍🏽

        OP’s title, and similarly phrased ones for other commonly disliked settings, aren’t actually looking for dialogue… they’re just “hey guys, light mode, amirite?” jokes phrased as questions

          • papalonian@lemmy.world
            link
            fedilink
            arrow-up
            1
            arrow-down
            7
            ·
            1 day ago

            The same reason mine can’t; because I didn’t care to phrase it as such. If I were actually interested in starting a dialogue, I wouldn’t have phrased the last line of my parent comment the way I did. I would have asked the question in a neutral or positive tone to show the reader that I’m not attacking their position, explicitly or implicitly.

            “People that XYZ, why?”

            This phrasing is automatically othering anyone that would be able to respond. Without any other context, it can easily be interpreted with more hostility, especially online.

            “What are the benefits of using motion blur?”

            This phrasing puts no implicit judgment on the person, and instead seeks to find positive attributes of the subject in question. Any bias that can be inferred is positive.

            While I concede that op certainly could have asked the question in genuine earnest, my time on the Internet has taught me that the likelihood of that is far less likely than that of op asking a sarcastic question.

            • Shapillon@lemmy.world
              link
              fedilink
              arrow-up
              3
              ·
              edit-2
              1 day ago

              It’s something that I really dislike on the internet.

              We lose a lot of cues because writing and empathy due to not being in same physical space. In the end we tend to assume the worst about each other and react much more agressively.

              Imho it’s kinda similar to how road rage or videogame flaming work.

              quick edit: I agree that OP’s question could be loaded otoh not that we assume it is with such a limited context.

    • FelixMortane@lemmy.ca
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      6
      ·
      1 day ago

      Best and most correct answer here … and this comes from a guy that hates motion blur and lens flare

      • frayedpickles@lemmy.cafe
        link
        fedilink
        English
        arrow-up
        10
        arrow-down
        1
        ·
        edit-2
        1 day ago

        The best and most correct answer is “let’s just sit in silence and not discuss why we like or dislike things”?

        Are you from the Midwest? That’s a super duper Ohio answer right there.

          • frayedpickles@lemmy.cafe
            link
            fedilink
            English
            arrow-up
            4
            ·
            edit-2
            1 day ago

            My general life experience since leaving the east coast is that westerners would rather talk about hiking and farmers markets than anything that is actually real and Midwestern folks would rather avoid conflict at all costs to the point of being somehow more passive aggressive than people from Seattle. Ohio, specifically places like Cincinnati, is the poster child for the Midwest.

            • FelixMortane@lemmy.ca
              link
              fedilink
              English
              arrow-up
              1
              ·
              8 hours ago

              If you want “more of an answer” this question is already loaded to be implying that leaving motion blur on is the wrong answer. What kind of discussion could you possibly have around this? “I like how the blurred images fly past me” vs “I think you are wrong, clear images only club!”.

              This isn’t something that will grow someones understanding or open up a whole new idea to them. Anyone can go click the button on and off, compare, and make a choice. If you were discussing what preferences someone had for a receipt and how they substitute ingredients for more/less savory, that makes sense for discussion. This does not.

              Also, Canadian originally from Ontario and currently living in Alberta.