Have narrowed down the issue to some point between the router reviving a request from my sys-net for an slaac frame or dhcp and my sys-net receiving nothing back. My other devices work fine with getting ips via dhcpv6 or slaac so pretty sure not a router issue. Can anyone help?

Edit 1: So ive done some more debugging and determined that it is an issue with not receiving RA frames specify over wifi. I have found this thread and it seems that they are experiencing the exact same symptoms as I am. This leads me to believe it is a firmware/kernal issue. I’m running 6.6.48-1.qubes.fc37.x86_64 and my wifi card is MT7922A22M i cant find anyhting relevent except this

Edit 2: it is an issue specifically with using a Debian template for sys-net. My temporary solution has simply been to use a Fedora template instead.

  • 🇦🇺𝕄𝕦𝕟𝕥𝕖𝕕𝕔𝕣𝕠𝕔𝕕𝕚𝕝𝕖@lemm.eeOPEnglish
    3·
    3 days ago

    I’ve already tried that. I did sudo tcpdump -i <interface> -n -vv -s 0 -c 100 -W 100 ip6 for each interface then in a seperate shell ran sudo dhclient -6 -v <interface> and sudo rdisc6 <interface>. I could capture my system soliciting the router but was not getting any response.

    ik it looks like a router issue but other devices are working fine getting globally routed ip’s as they should.

    • jetAEnglish
      3·
      3 days ago

      Can you use another machine to look at the raw packets on the line leaving your qubes box?

      Maybe some VxLAN setup on your router?

        • jetAEnglish
          2·
          5 hours ago

          Good job on narrowing it down. I’m not sure I’m ready to blame the framework adapter just yet. it’s still possible the ipv6 issue is somewhere in the ap stack, examining the packets is the gold standard.

          But yeah, it seems the most likely problem would be the sys-net wifi drivers